Electric heater controller 6 kW - temperature probe incl.

Product description

This is a controller for electric heating elements. It controls single-phase 230 VAC or two-phase 400 VAC electric heating elements. Time-proportional control - TRIAC technology - is used to control the heating element. The ambient temperature is measured via the integrated PT500 temperature probe. The temperature setpoint can be adjusted via the integrated potentiometer. An optional external potentiometer can be connected to adjust the setpoint remotely. There is one digital input for remote ON-OFF switching and one digital input to switch between a day and night temperature setpoint. The maximum (resistive) load is 3,2 kW / 6 kW.
Manufacturer's ID
AH2C1-6 -500

Additional specifications and description

Electric heater with day-night regime
Electric heating elements convert electricity into warm air. This warm air can be used to heat a room or a building. The AH2C1 controllers use time-proportional control (TRIAC technology) to control heating element(s). The requested day and night temperature can be adjusted via two potentiometers on the front cover. Via a digital input, the day or night regime can be selected. If necessary, an external potentiometer can be used to adjust the temperature setpoint remotely.
Built-in temperature probe
This controller has a built-in PT500 temperature probe to measure the ambient temperature.
Extra heating capacity  
Electrical heaters up to 3,2 kW (230 VAC) or up to 6 kW (400 VAC) can be controlled. If necessary, extra heating capacity can be connected via an expansion module. The expansion or slave module can be connected via the output (0-10 V or 0-20 mA). The extra heaters are controlled synchronously.
Solid enclosure
The enclosure is made of high-quality r-ABS VO (UL94) plastic. This material is flame extinguishing in case of fire, very tough and offers good protection against impacts. It offers an IP54 protection against ingress of moisture and dirt.