Filter
Manufacturer
More
Less

Article navigation
right
Photovoltaic Module Mono half-cut 415 Pmax
right
Photovoltaic Module Mono half-cut 415 Pmax
Ulica Solar Mono UL-415M-144 photovoltaic panel

Monocrystalline half-cut PV module Ulica Solar UL-415M-108HV | 415 W

Product description

Mono UL-415M-108HV photovoltaic panel from Ulica Solar with a peak power of 415 W. Each panel contains 108 half-cut cells made from monocrystalline silicon. The panel achieves a conversion efficiency of 21,25%. 30x30 mm frame from anodised aluminium in a silver colour with pre-drilled holes for mounting, grounding and water drainage. Cables with a length of 1,4 m and 4 mm² cross section, equipped with MC4 connectors.

Additional specifications and description

Overview
The Mono UL-415M-108HV panels from Ulica combine high photovoltaic conversion efficiency and reliability, which results in a lower LCOE (levelised cost of electricity), making them the right choice for your long-lasting PV installation.
In addition to their high performance, they have excellent corrosion resistance, long-term durability in adverse conditions, optimal thermal coefficients, good photoconductivity, and low toxicity.

What are monocrystalline panels?
The semiconducting properties of silicon crystals make them the basis of modern solar panels. In older/cheaper panels, each cell contains multiple silicon crystals, which is why these panels are called polycrystalline.
By contrast, the cells in Ulica Mono panels are made from thin wafers cut from cylindrical silicon ingots that form a single large crystal, which is why they are monocrystalline.
Monocrystalline panels achieve higher efficiency, perform better in low light, and last longer.

What are half-cut panels?
Half-cut PV panels represent an evolution of the traditional c-Si solar panels - they feature twice the number of cells, which offers multiple benefits. Each cell in a half-cut panel has half of the current flowing through it, which increases efficiency by reducing resistive losses.
The increased number of cells and the independent operation of the upper and lower half of the panel ensures up to 50% better performance in partial shading conditions when compared to traditional panels.
The smaller physical size of each cell also makes them more resistant to microscopic cracking, which can occur in extreme weather conditions and hailstorms.

Why choose Ulica?
Advanced technologies and manufacturing methods:
Ulica uses advanced diffusion technology, which makes possible the automatic welding and laser cutting of solar cells during production. The high purity of the silicon used in the manufacturing process allows the photovoltaic cells in each panel to be as efficient as possible, achieving up to 21.25% conversion efficiency. Thanks to this, the Mono UL-415M-108HV panels are very compact for their power output and take up less area. More than that, the power output of each cell, and as a consequence, of each panel, is almost perfectly uniform, with a power output variance of just no more than 5 W.

Long life:
The Ulica monocrystalline solar panels have an extended life span and will continue to function long after their warranty expires.
They have a low annual degradation rate and will continue to make at least 84,80% of their design power after 25 years! Additionally, the panels are highly resistant to Potential Induced Degradation (PID) and have been torture tested under high temperatures and 85% humidity for 96 hours. They can withstand 2400 Pa of wind pressure and 5400 Pa of mechanical load from snow. They are TÜV certified and have successfully passed tests for salt and ammonia corrosion, sand and dust resistance, and fire resistance.

World-famous warranty:
Ulica's modules have a 12-year material and workmanship guarantee and a 25-year power output guarantee.

Design and mounting
The Mono UL-415M-108HV features a silver-coloured, anodised aluminium frame with a height of 30 mm with pre-drilled holes for mounting, electrical grounding and water drainage, but using mounting clamps is also possible.
The built-in cables have a cross section of 4 mm², use standard MC4 connectors, and are 1,4 m long, which provides flexibility when designing the mounting system for the PV installation.

The full technical specifications, mounting instructions and EU Declaration of Conformity are available for download on this page.


Alternative articles

Related articles

Frequently asked questions

Photovoltaic panels produce enough clean energy to offset their total lifetime carbon emissions within just 3 years, and the expected lifespan of a photovoltaic installation is at least 25 years. PV installations will produce enough clean power to offset their environmental impact several times over ...

Even when using high-quality components from reputable manufacturers, there is always a possibility that a component arrives defective or damaged. With this in mind, we inspect every component thoroughly before installation and test the system comprehensively before commissioning ...

The mounting system is the framework to which the panels mount. It is of great importance to the total cost, the speed of construction, and even the longevity of the photovoltaic installation. The optimal choice of mounting system depends on the location of the panels, as well as their number and orientation ...

No, the photovoltaic system will work and produce power regardless, but having a battery offers many benefits. Batteries allow you to take full advantage of all the solar energy produced during the day and make your home or business partially or entirely energy independent ...

The monocrystalline panels offered by Building Services Plovdiv achieve an efficiency between 20 and 22% under standard testing conditions, with the newer N-Type TOPCon panels achieving between 22 and 23%. In practice, many factors can negatively influence the performance of a solar panel ...

Remarks, reviews & ratings

13/11/2023
It is good product
13/11/2023
Recommend
13/11/2023
Recommend
Add review and rating
0
 Webpage not supported in internet explorer use chrome ,firefox or edge 
Report an error